Search Results

The authors advance for discussion some important problems in the construction of airplanes for military use in this country. The functions of military airplanes designed for strategical and tactical reconnaissance, control of artillery fire and for pursuit are outlined. Problems in construction with reference to the two-propeller system, methods of reducing vibration, application of starting motors, details of the gasoline supply-system, metal construction for airplanes, flexible piping, desirable characteristics of mufflers, shock absorbers, landing gear, fire safety-devices, control of cooling-water temperature, variable camber wings, variable pitch propellers and propeller stresses, are all given consideration. The paper is concluded with suggestions for improvement in design relating to the use of bearing shims, the rigidity of crankcase castings, interchangeability of parts and better detail construction in the oiling, ignition, fuel supply and cooling systems.

The author states as his object a review of what has been done and what must be done to make tractors successful in operating on low-grade fuels, especially kerosene. He takes up in order the four principal methods in common use of applying heat to vaporize kerosene, pointing out the advantages and disadvantages of each method and of its modifications. The author then cites various experiments with different types of carbureters in burning kerosene, drawing at length upon his own experience in this connection. He cites difficulties with gas distribution, manifold condensation, pistons and spark-plugs and points out that carbureter design is inseparable from considerations of tractor engine and manifold design. That better progress has not been made in the past in developing kerosene-burning tractor engines is stated to be largely owing to the fact that there has not been sufficient cooperation between engine and carbureter manufacturers.

The title of this paper fully indicates its scope. The author presents an intimate picture of conditions prevailing at the war front which affect the operation and maintenance of war trucks, and these two factors in turn indicate the trend that design should take. The training of the mechanical transport personnel of the Army is also gone into at some length. The English and American trucks used earlier in the war consisted of about nineteen different makes and forty-two totally different models, resulting in a very serious problem of providing spare parts and maintenance in general. In the British Army transportation comes under an Army Service Corps officer called the Director of Transport and Supplies. At the outbreak of the war these officers had had little mechanical experience, horses being employed principally. In the French Army motor vehicles were used to a greater extent before the war, under the artillery command.

The author first points out how increasing population and rising standards of living have increased the demand for foodstuffs and how such industrial activities as are brought about by the present conflict magnify the seriousness of the food problem, not only by withdrawing workers from the farms, but also by increasing food consumption on the part of those engaged in the speeded-up industries in order to supply the increased human energy required. The author then passes to a discussion of the tractor as a means for increasing the food supply by taking the place of withdrawn labor and cheapening production. Several charts show the effect of increased individual activity on food consumption, the relation of food consumption to standards of living and the growth of population, the variation of food demand during political activities during the past century, and the relation of the cost per calorie of various cereals.

The author outlines the history of the 550 submarine chasers built for the British Government between April, 1915, and November, 1916, and attributes the success of the undertaking largely to scientific standardization. He cites some of the early difficulties in obtaining supplies and tells how they were met, and mentions how and why the fabrication was carried out in this country and the assembly made in Canada. The paper concludes with citation of the principal dimensions of the boats, power, speed and cruising radius. In the course of the discussion the author refers further to the power plant and mentions some of the war-time duties of this type of craft.

Starting with the statement that command of the air in warfare rests largely with the side that produces the best single-seater fighter, the author proceeds to outline some of the problems confronting the designer of fighting airplanes, and particularly the smaller ones. Considering better performance and better fighting qualities as the main desiderata, the author discusses means of obtaining them by: (1) increasing the horsepower-weight ratio; (2) decreasing the wing or structure resistances; (3) devising a new arrangement of the supporting planes, with regard to the position of pilot or crew, or by a combination of the above. Considerable space is devoted to methods of decreasing wing resistance, principally by employing low-resistance aerofoils, and the shaping of wing tips is also referred to.

The author believes that an incompatibility exists between the results achieved in this country by the growth of the automobile industry and the almost complete lack of rational data on the most essential elements of kinetics relating to the modern automobile. He submits considerations that can be used in establishing a rational theory of spring suspension in general. A few words are devoted to the first principles of dynamics of springs, to damping, kinematic features of harmonic motion, energy consumption and shock absorbers. An introductory problem, involving an imaginary one-wheel “elemental car”, meant for purely inductive purposes, is then analyzed. Finally the main problem is presented in the form of an analysis of a skeleton-car, spring-suspended and simplified as much as possible.

After pointing out the existing dearth of easily workable data and formulas covering automobile suspensions, the author mentions the elements that contribute to riding comfort. He then outlines what he considers a good suspension, tabulating the spring dimensions of five hypothetical cars, typical of those on the American market. Curves of spring deflection are included in the paper. Functions of rear springs, the damping effect essential in good suspensions, “thin leaf” springs and spring lubrication are next discussed. In conclusion the author covers means of improving a car's riding qualities and cites a very interesting test for determining spring performance by means of the impressions made on a photographic plate by light from electric lamps mounted on wheels and fenders of an automobile and on the passengers.

After a few general introductory remarks the author outlines the operating requirements for tractors, and takes up the matter of the proper sizes of tractors, stated in horsepowers per given number of plows. The use of lower-grade fuels, value of water in the engine, cylinder construction, methods of lubrication and design of drive-wheels are the subjects covered by the balance of the paper.

The author, from a first-hand study of this engine in the laboratory of Professor Junkers, traces the progress of the developmental work, and discusses the methods of operating the engine, its present status, its application to airplanes, trucks and tractors, details of marine and stationary types, fuel, advantages of and objections to the double-piston construction, and describes at some length the various parts entering into the construction of this type of engine. In conclusion, he summarizes the fundamental advantages of the Junkers engine.

The author states that the objects of the paper are to define and trace the development of the various processes of carburetion, and to offer such suggestions along these lines as may assist the investigator in developing motorboats, automobiles and self-contained unit motor cars for railway purposes. The surface carburetor is mentioned chiefly as of historic interest. In considering the jet carbureter the author discusses the proportion of gas desired, the effect of the varying inertia of the air and the liquid gasoline and the breaking up of the combustible needed. Following sections review the devices for using kerosene, such as gasoline jet carbureters to which heat is applied, devices of the fixed gas type, the introduction of combustible directly into the cylinder, forcing combustible directly upon a hot surface in the cylinder and devices which raise the combustible to the boiling point.

The author first considers the size of farm on which tractors can be used profitably. Confining his remarks to certain of the central and north central states, he points out the fact that there is a strong tendency for farms from 20 to 100 acres to be combined with others to make units of a more efficient size for the application of modern farming methods. Farms from 100 to 500 acres, representing 65 per cent of the total farm acreage, are the greatest users of tractors. Farms over 500 acres contain 25 per cent of the farm land, and also represent an important tractor market. Efficient sizes of tractors are next treated; three and four-plow sizes are generally preferred. Belt work, representing 50 per cent of a typical tractor's work, and other special duties performed by the tractor are next referred to.

The author confines his discussion to engines used on pleasure cars, inasmuch as practically all commercial vehicles use the four-cylinder type. The performance expected of their cars by automobile owners is outlined, particularly as regards performance, durability and maintenance cost. In-asmuch as the horsepower required is often determined by the acceleration demanded, the argument in favor of four-cylinder engines is based mainly on a comparison of its acceleration performance with those of engines having a larger number of cylinders. A number of acceleration curves are given for these engines. The paper next considers smoothness of operation at low, medium and high running speeds, asserting that the decrease in inertia forces due to lighter reciprocating parts has made it possible to increase the speed and thus reduce remarkably the vibration of the four-cylinder engine.

The author describes a number of detailed developments that took place during the working out of a line of worm-driven trucks. The details of front axle and steering parts are dealt with at length, the reasons for the final constructions being clearly explained and the constructions themselves well illustrated. Details concerning difficulty with the Hotchkiss type of drive on heavy trucks, troubles with drive-shafts and lubrication of the worm wheel are all covered thoroughly; spring-shackle construction and lubrication, radiator and hood mounting come in for detailed attention and the question of governors is interestingly covered. Brief reference is made to the influence of unsprung weight, the differences between truck and pleasure car practice in this respect being pointed out.

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.